Varen er på lager.
Varen er bestilt fra leverandør og leveringsdato er bekreftet.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varen må bestilles fra leverandør.
Varen befinner seg på fjernlager.
Varen er bestilt fra leverandør, men leveringsdato er ikke bekreftet.
Varene bestilles fra vår leverandørs lager.
Ubekreftet - Ta kontakt med kundesenter for nærmere informasjon.
Handlevogn
Handlevognen er tom.
Futaba S-Bus HUB-4
|
595,-
ink. mva.
476,-
eks. mva.
|
|
|
|
|
A 4-way distribution unit for th eS-BUS system with 50 cm long connection to S-BUS receiver.
Power hungry servos will be connected directly to the HUB-4 and power provided from the unit. Smaller servos with a lower power requirements will be connected directly to the receiver.
From the the output side, 2 HUB-2 or HUB-3 leads are provided for the wing panels, elevator and rudder servos will be connected via an additional, long HUB-2 lead.
Other S-BUS servos, such as nosewheel and tow release servos can be connected to the remaining connections.
The power supply is made via the switch harness 8A, a Limiter or a dual power supply. A compact solution to the S-BUS wiring, which is very powerful and sufficient for a continuous current load of 8A (16A intermittent) to suit the majority of models.
Power distribution and receiver will be separated within the model, in this manner, whereby the receiver may be located at the optimum reception point, for example within the canopy and the remaining wiring can be placed well within the fuselage.
A large range of ready-made NiMH and LiPo receiver battery packs, already fitted with the 30A hotmelt-sealed heavy-duty plug, are available for the HUB-4 S-BUS-System.