Robbe / Futaba FX-20 FASST
FX-20 er den nyeste radioen fra Robbe/Futaba. Passer til både fly, helikopter, båter og lastebiler som trenger mange funksjoner. Kan bygges ut med flere funksjoner ved behov.
Informasjon på Engelsk :
The FASST system is a Spread Spectrum System with Frequency Hopping (FHSS). Therefore it may transmit a maximum power of 100 mW EIRP and so has sufficient reserves for even large-scale model aircraft and jets. No shared channel disruption, almost impossible to have interference, not sensitive to electrical smog. The central point is the high-resolution 128 x 64 dot graphical display which is backlit to ensure it is easy to read. The system´s elegant design with clean lines is made possible by the new Cap Touch system. Contact-free sensors for the 3D hotkey allow a smooth and sealed surface without any protruding controls. Simple programming in combination with the graphical user interface. The proven menu structure and user interface was mainly adopted from the FX30 system, as was the modern and practical design of the casing. The software is available in 8 languages: German, English, French, Italian, Spanish, Czech, Russian or Dutch. The joystick coupling mechanism has twin ball bearings and is designed for Universal mode. They can easily be converted by the user themselves from "throttle right" to"throttle left". The FX-20 transmitter features the new rotary stick trimming. This type of trimming combines the advantages of traditional analogue trims with those of digital trimming. With just one movement, the direction and size of the trim will be set and automatically stored. The linear sliders are very practical in use for additional functions such as gyros, flaps or governors.
In total the system has 10 channels available (8 prop- and 2 control channels), while the channel sequence can be defined however you want. The transmitter is supplied fully equipped with 2 analogue rotary controls and 6 switches.
As with all robbe console transmitters this system also allows for stick switches to be built in. The electrical connectiobn is already present internally. All the different types of control are available. The sequence of the controls can be chosen freely, as well as the sequence of the servo outlets. Comprehensive Software has all the necessary functions for power, glider and helicopter models. Plenty of freely programmable mixers, optionally with 5-point curve,for setting up very complex mixer functions. Integrated trainer system with individual function switching. Freely configurable trainer channel assignment..
Using the SD-card the system software can be updated by the user themselves to the latest version at any time.
20 internal model memories, with infinite expansion using SD-card - 3862 models per 2 GB.
General funktions
4 joystick functions, 6 switches, 2 knob controls, 2 linear sliders, optionally 2 stick switches.
2 operating hours counters, of which one relates to a stored model
2 freely settable stopwatches, with memory function
Selectable large-scale display of stopwatches
Key-lock function
Selection of model, 20 internal model memories, extensible to 3862 models using optional SD-card (2 GB)
Stored model can be selected directly from the startup display
Trim value display in steps or %, with zeroising per trim memory
System funktions
Trainer Mode with individual function switching and mixed operation
Trainer function also on virtual channels, 8 or 12 channel operation
Freely configurable trainer channel assignment
Hardware-reversal for all controls and switches
Stick mode settings 1-4
User name of 10 characters
Choice of language: German, English, French, Italian, Spanish, Czech, Russian or Dutch.
Pakkens innhold:
FX-20 sender
7,4V 3400mAh LiPo batteri til sender
6108SB FASST mottager
Bryterkabel med ladekontakt
LiPo lader til senderbatteri(12V/230V)
Instruksjonsbok på engelsk